Powerkote Silicone Alkyd
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 423.00 | Volume Solids ±2% | 45.00 | Odor | dominant of paint thinner |
| VOC lbs/G | 3.53 | Weight Solids ±2% | 64.00 | Thinning | do not thin |
| |
| MPI # | 21 | Theor. Spread Rate | 481.0 | Weight | 9.80 |
| Gloss 60° | 90-105 | Wet Film Thickness | 3 MILS | Viscosity | 73 - 78 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | Temperature 350° F |
| |
| Tinting Type | Industrial | Toxic Properties | Non-toxic as dry film | Cleanup | 799260x Synthetic reducer |
| Local Harvest | | Light Reflectance | white 88%, less on tints | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 70 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 2 - 4 hours | Dry To Sand | N/A | Tack Free | 24 hours |
| Dry To Recoat | 14 to 16 hours | Dry To Topcoat | 14 to 15 hours | Dry To Hard | 7 - 14 days |
Prep & Prime
Surfaces must be clean, dry and free of contaminants such as wax, oils, grease, weld splatter, or loose mil/scale/rust. As a minimum, SSPC-SPC Hand Tool Cleaning or SSPC-SPC3 Machine Tool Cleaning is recommended. Smooth surfaces should be abraded to enhance adhesion. Improved performance can be achieved with SSPC-SP6 Commercial Blast. All surfaces prepared for painting should be coated within 8 hours of completion of surface prep.
| |
| Concrete Block | Prime and fill with 501901x Sprayable Block Filler. |
| Masonry | Masonry surfaces to be painted must be thoroughy cured, clean, and dry prior to painting. Priming is also recommended with Rodda.501601x First Coat Primer or 505901x Multi Prime. When repainting masonry, care must be taken to insure the surface to be painted is clean and sound. |
| Metal | Self-Priming. All rust, mill scale, dirt and other foreign material must be removed prior to painting. In corrosive environments prime with 708195x All Purpose Rust Inhibitive Primer, 708095 Barrier III or 708295 Barrier III HS Red Oxide Primer. |
| |
| Wood | Wood surfaces to be painted should be primed (and sanded if desired) prior to painting. Again, care must be taken to insure surfaces to be repainted are clean and sound. Use 501601x First Coat or 701501x Exterior Control Primer. |
| |
Application
Do not apply when air or surface temperatures are expected to drop below 50 degrees F. or rise above 95 degrees F. during application and drying.
May be applied using a brush, roller or spray.
| |
| |
| |
| |
| Airless Spray | Recommend pressure 2000 to 2500 psi, using .013 to .017 tip orifice. |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 1/17/2012 - Please contact us at 800.452.2315 for additional information or questions
