All Purpose Equipment Enamel
Product Data Sheet
| | | |
| Description | AN INTERIOR/EXTERIOR PIGMENTED ALKYD RESIN METAL ENAMEL |
758101x White Base
758102x Midtone Base
758103x Deeptone Base
758104x Neutral Base
7581XXx Stock Colors | |
|
| Basic Use | All Purpose Equipment Enamel is a highly pigmented medium oil alkyd enamel for use anywhere a hard, durable, enamel finish is desired. It is effective on surfaces such as structural steel, beams, trusses, metal doors, metal sash, metal trim, lockers, handrails, stairs and all types of machinery. |
| Colors | safety red 82, s.blue 83, s.yellow 84, s.green 85, s.orange 86, black 99 |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 442.00 | Volume Solids ±2% | 44.00 | Odor | dominant of paint thinner |
| VOC lbs/G | 3.69 | Weight Solids ±2% | 62.00 | Thinning | do not thin |
| |
| MPI # | 9 | Theor. Spread Rate | 475.0 | Weight | 9.60 |
| Gloss 60° | 85-105 | Wet Film Thickness | 4 mils | Viscosity | 75 - 79 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | excellent |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dry film | Cleanup | 799250x Mineral thinner |
| Local Harvest | | Light Reflectance | white 88%, less on tints | Packaging | quart, single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 1 to 2 hours | Dry To Sand | 24 hours | Tack Free | 1 to 2 hours |
| Dry To Recoat | < 6 hours > 24 hours | Dry To Topcoat | <6 hours> 24 hours | Dry To Hard | 24 hours |
Prep & Prime
Surfaces must be clean, dry and free of contaminants such as wax, oils, grease, weld splatter, or loose mil/scale/rust. As a minimum, SSPC-SPC Hand Tool Cleaning or SSPC-SPC3 Machine Tool Cleaning is recommended. Smooth surfaces should be abraded to enhance adhesion. Improved performance can be achieved with SSPC-SP6 Commercial Blast. All surfaces prepared for painting should be coated within 8 hours of completion of surface prep.
Application
Do not apply when air or surface temperatures are expected to drop below 50 Deg F. or rise above 95 Deg F during application and drying. Please see above for expected dry times.
| |
| |
| Brush | Use a natural bristle brush |
| Roller / Pad | Use 3/16" to 3/8" nap synthetic or lambswool roller cover.-Use a synthetic pad. |
| Airless Spray | Recommend pressure 2000 to 2500 psi, using .013 to .016 tip orifice. |
| |
| Conventional Spray | Recommend air pressure 40 - 60 psi; fluid pressure 20 psi; JGA 510 gun, FX tip, 705 air cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 11/10/2011 - Please contact us at 800.452.2315 for additional information or questions
