Fast Dry Floor Finish
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 381.00 | Volume Solids ±2% | 53.00 | Odor | dominant of paint thinner |
| VOC lbs/G | 3.18 | Weight Solids ±2% | 71.00 | Thinning | do not thin |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 11.00 |
| Gloss 60° | 60-75 | Wet Film Thickness | 3.0 | Viscosity | 68 - 72 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | excellent |
| |
| Tinting Type | Universal | Toxic Properties | Non-toxic as dry film | Cleanup | 799250x Mineral Thinner |
| Local Harvest | | Light Reflectance | white 90%, less on tints | Packaging | quart & single gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 70 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 4 hours | Dry To Sand | N/A | Tack Free | 4 hours |
| Dry To Recoat | 24 hours | Dry To Topcoat | 24 hours | Dry To Hard | N/A |
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. Remove loose paint and patch holes or cracks. Prime bare surfaces, dull or prime glossy surfaces, and then scuff sand using 80 to 100 grit sandapaper on a hand sander. remove all sanding dust.
| |
| |
| Masonry | Concrete surfaces must be thoroughly cured and acid-etched before painting. All traces of efflorescence must be removed with muratic or phosphoric acid wash. |
| |
| |
| Wood | No special treatment necessary for wood |
| |
Application
Can be sprayed when necessary, but adhesion and coverage may suffer.
| |
| |
| Brush | Use a top quality nylon/polyester brush . |
| Roller / Pad | Use a top quality 1/4" to 1/2" polyester or mohair nap roller cover. |
| |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 6/17/2011 - Please contact us at 800.452.2315 for additional information or questions
