Cat-A-Lac Lacquer White
Product Data Sheet
| | | |
| Description | AN INTERIOR PIGMENTED PRE-CATALYZED NON-YELLOWING WOOD LACQUER ENAMEL |
756401x Gloss
746401x Semi-Gloss
726401x Satin | Cat-A-Lac lacquers meet or exceed the test requirements of the National Kitchen Cabinet Assoc., ANSI test A161.1 |
|
| Basic Use | Cat-A-Lac is an internally acid catalyzed chemical resistant wood finish that eliminates the need to mix expensive, limited potlife, two component lacquers. and in addition, exhibit excellent resistance to impact, acid, alkali and solvent.for fine quality kitchen cabinets, doors, millwork or other interior wood surfaces. Cat-A-Lac develops good film build and depth as well as excellent resistance to household detergents, household chemicals, cold checking, marring and abrasion. |
| |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 623.00 | Volume Solids ±2% | 24.00 | Odor | lacquer thinner |
| VOC lbs/G | 5.20 | Weight Solids ±2% | 38.00 | Thinning | do not thin |
| |
| MPI # | | Theor. Spread Rate | 350.0 | Weight | 8.40 |
| Gloss 60° | 75-85 | Wet Film Thickness | | Viscosity | 30 - 40 second Zahn #2 |
| Sheen 85° | | Dry Film Thickness | | Resistance | excellent |
| |
| Tinting Type | opti xp | Toxic Properties | Use with adequate ventilation. | Cleanup | 799461x |
| Local Harvest | | Light Reflectance | | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77º Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 15 - 30 minutes | Dry To Sand | 30 - 45 minutes: Must be sande | Tack Free | |
| Dry To Recoat | 30 - 45 minutes: Must be sande | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
| |
| |
| |
| |
| |
| Wood | Seal and prime wood with 706400x Cat-A-Lac Vinyl Modified Clear Sealer or 706401x Cat-A- Lac Lacquer Primer Surfacer. |
| |
Application
| |
| |
| |
| |
| Airless Spray | Use equipment capable of maintaining constant 15 psi at the tip. Tip size .011" to .013". |
| |
| Conventional Spray | DeVilbiss JGA510 with FX tip and 704 air cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 1/14/2010 - Please contact us at 800.452.2315 for additional information or questions
