Cat-A-Lac Lacquer UV Resistant
Product Data Sheet
| | | |
| Description | Clear Pre-Catalyzed Lacquer. A premium quality lacquer enamel for fine quality kitchen cabinets, doors millwork or other interior wood surfaces. Cat-A-Lac develops good film build and depth as well as excellent resistance to household detergents, household chemicals, cold checking, marring and abrasion. |
746400UVx Semi Gloss
726400UVx Satin | |
|
| Basic Use | Cat-A-Lac is an internally acid catalyzed chemical resistant wood finish that eliminates the need to mix expensive, limited potlife, two component lacquers. Cat-A-Lac lacquers meet or exceed the test requirements of the National Kitchen Cabinet Assoc., ANSI test A161.1 and in addition, exhibit excellent resistance to impact, acid, alkali and solvent. |
| |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 675.00 | Volume Solids ±2% | 18.00 | Odor | lacquer thinner |
| VOC lbs/G | 5.63 | Weight Solids ±2% | 24.00 | Thinning | do not thin |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 7.50 |
| Gloss 60° | 40-50 | Wet Film Thickness | | Viscosity | 30 to 40 second Zahn #2 |
| Sheen 85° | | Dry Film Thickness | | Resistance | excellent |
| |
| Tinting Type | | Toxic Properties | Use with adequate ventilation. | Cleanup | 799461x Lacquer Thinner |
| Local Harvest | | Light Reflectance | | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77º Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 10 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | 30 minutes. | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
| |
| |
| |
| Metal | Not recommended for these surfaces |
| |
| Wood | Wood surfaces should be free of foreign matter and properly sanded. Seal wood with 706400x Cat-A-Lac Sanding Sealer; however, Cat-A-Lac may be used as a self-seal system. Dry and sand as a conventional sealer. Do not use a stearated sealer under Cat-A-Lac. |
| |
Application
Surface temperature should be above 50ºFahrenheit. Where humid conditions exist, blushing may occur. Use 799464x Lacquer Retarder when these conditions are prevalent. Contains sanding aids; thus it cannot be sprayed hot.
| |
| |
| |
| |
| Airless Spray | Use equipment capable of constant 1800 psi at tip. |
| HVLP | DeVilbiss JGHV 531 MP or equivalent. |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/13/2011 - Please contact us at 800.452.2315 for additional information or questions
