Porsalite Low-Sheen

Product Data Sheet
DescriptionAN INTERIOR/EXTERIOR PIGMENTED SYNTHETIC ALKYD ENAMEL PAINT
735001x White Base
735002x Midtone Base
735003x Deeptone Base
Basic UsePorsalite is a premium quality enamel that features excellent brushing properties and flows to a smooth durable rich finish and is designed to exhibit excellent hiding properties. May be used on primed or previously painted plaster, drywall, as well as metal trim, doors, sashes, masonry, metals and cabinets.
Colors
stocked in white only
Properties
VOC gr/L364.00Volume Solids ±2%53.00Odordominant of paint thinner
VOC lbs/G3.04Weight Solids ±2%73.00Thinningnone recommended
 
MPI #Theor. Spread Rate567.0Weight11.10
Gloss 60°30-42Wet Film Thickness3 milsViscosity78 - 82 Krebs Units
Sheen 85°Dry Film Thickness1.5 milsResistanceexcellent
 
Tinting TypeuniversalToxic PropertiesNon-toxic as dry filmCleanup799250 mineral or 799260 syn
Local HarvestLight Reflectancewhite 88%, less on tintsPackagingquart, single & five gallons
 
 
 
 
 
 
 
Dry Times
At 77º Fahrenheit and 50% Relative Humidity.
Dry To Touch5 hoursDry To SandTack Free
Dry To Recoat16 to 24 hoursDry To TopcoatDry To Hard
Prep & Prime
Concrete BlockFill with 501901x sprayable Block Filler.
MasonryPrime with 505901x Multi Prime.
MetalGALVANIZED: Clean thoroughly. Prime with 709700x Vinyl Wash Primer. ALUMINUM: Hand clean areas that exhibit white corrosion. NEW ALUMINUM: Surfaces must be properly treated. FERROUS METAL: Prime with 7082xxx Barrier III High Solids Metal Primer or 708195x All Purpose Rust Inhibitive Primer.
WallboardPrime with 507801x Scotseal.
WoodNew Interior: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater, 703401x VariSeal or 702901x Speed Primer. New Exterior: Prime with 501601x First Coat or 701501x Exterior Control Primer
Application
BrushUse a natural bristle brush
Roller / PadUse 1/4" to 1/2" nap synthetic or lambswool roller cover.-Use a synthetic pad.
Airless SprayRecommend pressure 2000 to 2500 psi, using .013 to .016 tip orifice.
Conventional SprayRecommend air pressure 40 - 60 psi; fluid pressure 20 psi; JGA 510 gun, FX tip, 705 air cap.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/15/2009 - Please contact us at 800.452.2315 for additional information or questions