Driveline Acrylic White
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 74.00 | Volume Solids ±2% | 62.50 | Odor | slight ammonia odor |
| VOC lbs/G | 0.62 | Weight Solids ±2% | 79.50 | Thinning | none recommended |
| |
| MPI # | 97 | Theor. Spread Rate | 501.0 | Weight | 14.90 |
| Gloss 60° | <5 | Wet Film Thickness | 3.0 | Viscosity | 80-90 KU |
| Sheen 85° | <5 | Dry Film Thickness | 2.0 | Resistance | |
| |
| Tinting Type | n/a | Toxic Properties | | Cleanup | warm soapy water |
| Local Harvest | 32% | Light Reflectance | | Packaging | |
| |
| pH | 9.5 | Pigment Solids | Titanium Dioxide / inerts | Flash Point | >201 F (TCC) |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
| | | | | |
| Dry To Touch | 1 minute | Dry To Sand | | Tack Free | |
| Dry To Recoat | | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
Surfaces to be painted should be cured, clean, dry and free of foreign materials before coating.
| |
| |
| |
| |
| |
| |
| Asphalt | May be applied directly to surface. Allow new asphalt to cure a minimum of two weeks before painting. |
Application
Ideal surface temperatures for coating are 50 - 80 degrees for maximum efficiency. Spreading rate to approximate 1200 lineal feet of standard 4" stripe per gallon will result in a dry film thickness of 2 mils (allowing 20% loss for spraying).
| |
| Coats | 1 is adequate |
| Brush | Not recommended due to quick dry times |
| Roller / Pad | Not recommended due to quick dry times |
| Airless Spray | Spray with a 215 tip (or the equivilent 1704 traffic striping tip) to acheive a 4" line, or refer to tip manufacturers recommendation chart. |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 7/29/2010 - Please contact us at 800.452.2315 for additional information or questions
