All Purpose Enamel Flat Black
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 428.00 | Volume Solids ±2% | 47.00 | Odor | Dominant of paint thinner |
| VOC lbs/G | 3.57 | Weight Solids ±2% | 64.00 | Thinning | Do not thin. |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 10.00 |
| Gloss 60° | 0-3 | Wet Film Thickness | | Viscosity | 70 to 80 Kreb Units. |
| Sheen 85° | | Dry Film Thickness | 1.5 to 2 mils. | Resistance | Excellent. |
| |
| Tinting Type | | Toxic Properties | Non Toxic as a dry film. | Cleanup | 799250x Mineral Thinner or |
| Local Harvest | | Light Reflectance | | Packaging | quart, single and f |
| |
| | | | | |
| |
| Hap Content | 1.02 lbs per gallon, 122 grams | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 Degrees Fahrenheit & 50% Relative Humidity.
| | | | | |
| Dry To Touch | 1 to 2 hours. | Dry To Sand | | Tack Free | |
| Dry To Recoat | 8 hours. | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
| |
| |
| Masonry | New Masonry: Other than block, prime with 501601x First Coat Primer or 505901x Multi Prime. Block-New Interior: Prime and fill with 501901x Sprayable Block Filler. |
| Metal | Galvanized: Clean thoroughly. Prime with 4079 Galva Cling. Aluminum: Hand clean areas that exhibit white corrosion. New aluminum: Surfaces must be properly treated. Ferrous Metal: Prime with 7082xxx Barrier III High Solids Metal Primer or 708195x AllPurpose Rust Inhibitive Primer. |
| Wallboard | Prime with 507801x Scotseal. |
| Wood | New Interior: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater, 703401x Vari-Seal or 702901x Speed Prime. |
| |
Application
| |
| |
| Brush | Use a natural bristle brush. |
| Roller / Pad | Use 3/16" to 3/8" nap synthetic or lambswool roller cover.-Use a synthetic pad. |
| Airless Spray | Recommended pressure 2000 to 2500 psi using .013" to .016" tip orifice. |
| |
| Conventional Spray | Recommend air pressure 40 - 60 psi; fluid pressure 20 psi;JGA 510 gun, FX tip, 705 air cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/15/2009 - Please contact us at 800.452.2315 for additional information or questions
