Zone Marking Paint
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 447.00 | Volume Solids ±2% | 45.00 | Odor | light aliphatic |
| VOC lbs/G | 3.73 | Weight Solids ±2% | 68.00 | Thinning | not recommended |
| |
| MPI # | 32 | Theor. Spread Rate | 481.0 | Weight | 11.70 |
| Gloss 60° | 2-12 | Wet Film Thickness | 3 mils | Viscosity | 70 - 75 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | abrasion resistance excellent |
| |
| Tinting Type | Industrial | Toxic Properties | Non-toxic as dry film | Cleanup | 799268x Traffic thinner |
| Local Harvest | | Light Reflectance | | Packaging | single & five gallon |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 70 Degrees F. to 80 Degrees F. Ready for traffic within two hours of painting.
| | | | | |
| Dry To Touch | N/A | Dry To Sand | N/A | Tack Free | N/A |
| Dry To Recoat | N/A | Dry To Topcoat | N/A | Dry To Hard | N/A |
Prep & Prime
| |
| |
| Masonry | Surface to be painted should be thoroughly cured and clean and dry before painting. |
| Metal | Surface to be painted should be clean, dry and properly primed |
| |
| Wood | Surface to be painted should be clean and dry. |
| |
Application
Do not apply to surfaces of temperatures below 45 Degrees F. Spreading rate of 1040 lineal feet of standard 4" stripe per gallon will result in a dry film thickness of 1.5 mils (allowing 20% loss for spraying).
Additional Spread Rates: 1380 lineal feet of 3 inch strip per gallon.
830 lineal feet of 5 inch strip per gallon.
690 lineal feet of 6 inch strip per gallon.
| |
| |
| Brush | Use a good quality natural bristle brush |
| Roller / Pad | Use 3/8" to 1/2" nap synthetic roller cover.-Use a synthetic pad. |
| Airless Spray | Use suitable line striping equipment |
| |
| Conventional Spray | Use suitable line striping equipment |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 6/15/2011 - Please contact us at 800.452.2315 for additional information or questions
