Ply Coat Non-Skid Gray
Product Data Sheet
| | | |
| Description | AN EXTERIOR/INTERIOR PIGMENTED SHORT OIL/PHENOLIC MODIFIED ALKYD RESIN PAINT |
| 715598x Horizon Gray | THIS PRODUCT FOR INDUSTRIAL USE ONLY |
|
| Basic Use | An exterior/interior non-slip alkyd coating for coating concrete, metal and wood surfaces where anti-slip properties are desired. Primarily intended for pedestrian traffic, such as ramps, walkways, platforms, stairs, etc. |
| |
| | Components | Contains recycled content |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 425.00 | Volume Solids ±2% | 50.40 | Odor | Sharp of aromatic thinner |
| VOC lbs/G | 3.55 | Weight Solids ±2% | 67.30 | Thinning | 799260x Synthetic Reducer |
| |
| MPI # | | Theor. Spread Rate | 202.0 | Weight | 10.80 |
| Gloss 60° | 0-5 | Wet Film Thickness | 8 mils | Viscosity | 120 - 140 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 4 mils | Resistance | excellent |
| |
| Tinting Type | Industrial | Toxic Properties | Non-toxic as dry film | Cleanup | 799260x Synthetic Reducer |
| Local Harvest | | Light Reflectance | Very low | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 1/2 hour | Dry To Sand | N/A | Tack Free | 1/2 hour |
| Dry To Recoat | 1 hour | Dry To Topcoat | 1 hour | Dry To Hard | 2 to 4 hours |
Prep & Prime
Surfaces must be clean, dry and free of contaminants such as wax, oils, grease, weld splatter, or loose mil/scale/rust. As a minimum, SSPC-SPC Hand Tool Cleaning or SSPC-SPC3 Machine Tool Cleaning is recommended. Smooth surfaces should be abraded to enhance adhesion. Improved performance can be achieved with SSPC-SP6 Commercial Blast. All surfaces prepared for painting should be coated within 8 hours of completion of surface prep.
| |
| |
| Masonry | Remove all traces of grease, efflorescence, etc., prior to painting. Etch concrete with muriatic acid to appearance of fine sandpaper. |
| Metal | Must be primed with Barrier III High Solids Metal Primer |
| |
| Wood | Prime with 702901x Speed Primer |
| |
Application
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 7/21/2011 - Please contact us at 800.452.2315 for additional information or questions
