Rural Manor Semi Transparent Stain
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 538.00 | Volume Solids ±2% | 32.00 | Odor | dominant of paint thinner |
| VOC lbs/G | 4.49 | Weight Solids ±2% | 43.00 | Thinning | do not thin |
| |
| MPI # | B3-13, B4-12 | Theor. Spread Rate | 400.0 | Weight | 7.80 |
| Gloss 60° | | Wet Film Thickness | | Viscosity | 15 - 19 seconds -#2 Zahn Cup. |
| Sheen 85° | | Dry Film Thickness | | Resistance | very good |
| |
| Tinting Type | universal | Toxic Properties | Non Toxic as dry film | Cleanup | 799250x Mineral Thinner |
| Local Harvest | | Light Reflectance | deep 75%, less on tints | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Farenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 2 to 4 hours | Dry To Sand | N/A | Tack Free | 2 - 4 hours |
| Dry To Recoat | 16 hours | Dry To Topcoat | 16 hours | Dry To Hard | N/A |
Prep & Prime
Wood: No special surface preparation required on new wood. All surfaces to be coated must be clean and dry. Not recommended on brushed, burnished or abraded plywood.
Application
| |
| |
| Brush | A natural bristle or good quality nylon / polyester brush is recommended. |
| Roller / Pad | Use a 3/8" to 1/2" lambswool or polyester cover will give best results.-A synthetic paint pad is recommended. |
| Airless Spray | Use equipment capable of maintaining constant 900 psi at the tip. .016" to .025" tip orafice. Follow with backroll/backbrush application. |
| |
| Conventional Spray | Use double regulated pressure pot equipped with an air agitator. Use DeVilbiss JGA510 with FF tip and 704 air cap. Follow with backroll/backbrush application |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 8/17/2011 - Please contact us at 800.452.2315 for additional information or questions
