Crystal Seal Sanding Sealer
Product Data Sheet
Properties
|
|
|
|
|
|
| VOC gr/L |
670.00 |
Volume Solids ±2% |
16.00 |
Odor |
strong thinner |
| VOC lbs/G |
5.59 |
Weight Solids ±2% |
23.00 |
Thinning |
do not thin |
| |
| MPI # |
|
Spread Rate |
300.0 |
Weight |
7.60 |
| Gloss 60° |
20-30 |
Wet Film Thickness |
|
Viscosity |
20 - 25 Zahn #3 |
| Sheen 85° |
|
Dry Film Thickness |
|
Resistance |
good |
| |
| Tinting Type |
|
Toxic Properties |
Use with adequate ventilation. |
Cleanup |
799461x Lacquer thinner |
| Local Harvest |
|
Light Reflectance |
|
Packaging |
single & five gallons |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Dry Times
At 77º Fahrenheit and 50% Relative Humidity.
|
|
|
|
|
|
| Dry To Touch |
15 - 30 minutes |
Dry To Sand |
|
Tack Free |
|
| Dry To Recoat |
30 minutes minimum. |
Dry To Topcoat |
|
Dry To Hard |
|
Prep & Prime
|
|
|
|
|
|
|
|
|
|
| Wood |
Surface should be dry, free of foreign matter and properly sanded before applying. |
|
|
Application
Surface temperature should be above 50º Fahrenheit. Where humid conditions exist, blushing may occur. Use 799464x Lacquer Retarder when these conditions are prevalent. Contains sanding aids; thus it cannot be sprayed hot.
|
|
|
|
|
|
|
|
| Airless Spray |
Use equipment capable of constant 1800 psi at tip. An .012" to .018" tip is recommended. |
| HVLP |
DeVilbiss JGHV 531 MP or equivalent. |
| Conventional Spray |
Binks Slimline Mach 1 or equivalent gun. 92 Air Cap with 92 nozzle. Use double regulated air pot with 5 - 7 psi air pressure at gun. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/10/2009 - Please contact us at 800.452.2315 for additional information or questions
