Synthetic "Speed" Prime
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 447.00 | Volume Solids ±2% | 44.00 | Odor | Dominant of paint thinner |
| VOC lbs/G | 3.73 | Weight Solids ±2% | 66.00 | Thinning | do not thin |
| |
| MPI # | | Theor. Spread Rate | 471.0 | Weight | 11.00 |
| Gloss 60° | 0-5 | Wet Film Thickness | 3 mils | Viscosity | 77 - 81 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dry film | Cleanup | 799250x Mineral Thinner |
| Local Harvest | | Light Reflectance | white 86%, less on tints | Packaging | quart, single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 1/2 hour | Dry To Sand | 2 hours | Tack Free | |
| Dry To Recoat | 2 hours | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. Remove loose paint and patch holes or cracks. Prime bare surfaces, dull or prime glossy surfaces, and then scuff sand using 80 to 100 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply over unprimed metal.
| |
| |
| |
| |
| |
| Wood | Must be thoroughly dry and cleaned prior to painting |
| |
Application
CONDITIONS: Do not apply when surface temp are expected to drop below 50 Deg. F. or rise above 95 Deg. F. during application and drying. Surface temperature must be least 5 Deg. F. (3 C) above dew point. Do not apply to surfaces which will be exposed to rain or moisture before coating is dry.
| |
| |
| Brush | Use a top quality natural bristle brush or nylon/polyester brush |
| Roller / Pad | Use 1/4" to 3/4" nap synthetic roller cover. |
| Airless Spray | .011" to .019" tip and 1700 psi maximum |
| |
| Conventional Spray | DeVilbiss JGA gun or equivalent is recommended. Fluid pressure of 10 lbs.; atomizing pressure; 30 - 35 psi. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 11/11/2011 - Please contact us at 800.452.2315 for additional information or questions
