Horizon Pearl Lustre
Product Data Sheet
| | | |
| Description | AN INTERIOR PIGMENTED COPOLYMER EMULSION PAINT, low odor & solvent free |
563501x White
563502x Midtone
563503x Deeptone
563504x Neutral | This product manufactured to meet all requirements of LEED-NC credit EQ4.2 low emitting materials - paint & coatings |
|
| Basic Use | Horizon Interior Pearl Lustre provides a durable, low odor/low VOC enamel finish for interior walls and woodwork. Horizon Enamel can be used without typical odor complaints in occupied areas because of very low odor during application and drying. |
| Colors | tintable white to black |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 0.00 | Volume Solids ±2% | 39.50 | Odor | Not offenesive |
| VOC lbs/G | 0.00 | Weight Solids ±2% | 54.00 | Thinning | None recommended |
| |
| MPI # | | Theor. Spread Rate | 417.0 | Weight | 11.40 |
| Gloss 60° | 3-5 | Wet Film Thickness | 4 mils | Viscosity | 96-100 Krebs Units |
| Sheen 85° | 20-25 | Dry Film Thickness | 1.5 mils | Resistance | Good |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dry film | Cleanup | warm soapy water |
| Local Harvest | 38-46% | Light Reflectance | white 90%, less on colors | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 1/2 hour | Dry To Sand | N/A | Tack Free | 1/2 hour |
| Dry To Recoat | 2 hours | Dry To Topcoat | N/A | Dry To Hard | 2 hours |
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive cahlk and other foreign matter. Remove loose paint and patch holes or cracks. Prime bare surfaces, dull or prime glossy surfaces and then scuff sand using 80 to 100 grit sandpaper on a hand sander. Remove all sanding dust. Do not apply over unprimed metal.
| |
| Concrete Block | New: Use 501901 Smooth Block Filler |
| Masonry | Use 503501 Horizon Primer |
| |
| Wallboard | Prime with 503501 Horizon Primer Sealer |
| Wood | New Interior: Prime with No. 502001x Unique II 100% Acrylic Enamel Undercoater. |
| |
Application
Do not apply when air of surface temperatures are expected to drop below 50 Deg. F. or rise above 95 degrees. F. during application and drying. Please see above for expected dry times.
| |
| Coats | Two coats recommended for superior coverage. |
| Brush | A nylon/polyester brush is recommended for this project. |
| Roller / Pad | Use 3/8" to 3/4" nap synthetic roller cover.-Use a synthetic pad. |
| Airless Spray | Recommend pressure 2000 to 2500 psi, using .015 to .21 tip orifice. |
| HVLP | Reduce up to one pint per gallon with water. Accuspray 24K |
| Conventional Spray | Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" to .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 8/9/2011 - Please contact us at 800.452.2315 for additional information or questions
