Acrylic Dryfall Semi-Gloss
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 149.00 | Volume Solids ±2% | 31.00 | Odor | ammonia odor |
| VOC lbs/G | 1.24 | Weight Solids ±2% | 44.00 | Thinning | none |
| |
| MPI # | | Theor. Spread Rate | 321.0 | Weight | 0.00 |
| Gloss 60° | 30 | Wet Film Thickness | 5 mils | Viscosity | 80 - 90 Kreb Units |
| Sheen 85° | 75+ | Dry Film Thickness | 1.5 mils | Resistance | Good |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dried film | Cleanup | warm soapy water |
| Local Harvest | 29% | Light Reflectance | white 84% | Packaging | five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% relative humidity
| | | | | |
| Dry To Touch | 15 minutes | Dry To Sand | N/A | Tack Free | 15 minutes |
| Dry To Recoat | 4 hours | Dry To Topcoat | | Dry To Hard | N/A |
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. Remove loose paint and patch holes or cracks. Prime bare surfaces, dull or prime glossy surfaces, and then scuff sand using 80 to 100 grit sandpaper on a hand sander. Remove all sanding dust.
| |
| |
| Masonry | Masonry must be thoroughly cured with all traces of efflorescence removed prior to painting. Self-priming. |
| Metal | All metal must be clean and dry prior to painting. Self-priming. |
| Wallboard | Self-priming. |
| Wood | Must be clean and dry. Self-priming |
| |
Application
Do not apply when air or surface temepratures are expected to drop below 50 degrees F. or rise above 95 degrees F. during application and drying.
| |
| |
| |
| |
| Airless Spray | Use equipment capable of constant 2000 psi, using a .21" to .30" tip size. |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 8/8/2011 - Please contact us at 800.452.2315 for additional information or questions
