Bookmark and Share

Horizon Semi Gloss

Product Data Sheet
Description AN INTERIOR PIGMENTED COPOLYMER EMULSION PAINT, low odor & solvent free
543501x White Base
543502x Midtone Base
543503x Deeptone Base
543504x Neutral Base
This product manufactured to meet all requirements of LEED-NC credit EQ4.2 low emitting materials - paints & coatings
Basic Use Horizon Interior Semi Gloss provides a durable, low odor / low VOC enamel finish for interior walls and trim, not intended for use on cabinets and shelving. Horizon Enamel can be used without typical odor complaints in occupied areas because of very low odor during application and drying. Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold and mildew that cause stains and odors on the dried paint film.
Colors
tintable white to black
Properties
VOC gr/L 0.00 Volume Solids ±2% 40.00 Odor not offenesive
VOC lbs/G 0.00 Weight Solids ±2% 52.00 Thinning none recommended
 
MPI # Spread Rate 428.0 Weight 10.70
Gloss 60° 45-55 Wet Film Thickness 4 mils Viscosity 96-100 Krebs Units
Sheen 85° 70+ Dry Film Thickness 1.5 mils Resistance good
 
Tinting Type universal Toxic Properties Non-toxic as dry film Cleanup warm soapy water
Local Harvest 24-28% Light Reflectance white 90%, less on tints Packaging single & five gallons
 
 
 
 
 
 
 
Dry Times
At 77º Fahrenheit and 50% Relative Humidity.
Dry To Touch ½ hour Dry To Sand Tack Free
Dry To Recoat 2 hours Dry To Topcoat Dry To Hard
Prep & Prime
Surface Preparation: Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. Remove loose paint and patch holes or cracks with spackling compound. Prime bare surfaces with proper primer. Glossy surfaces must be dulled or primed. Do not apply over unprimed metallic surfaces
Concrete Block New: 501901 Smooth Block Filler
Masonry Prime with 503501 Horizon Primer
Wallboard Prime with 503501 Horizon Primer Sealer
Wood New Interior: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater.
Application
Do not apply when surface or air temperatures are expected to drop below 50º F. or rise above 95º F during application and drying.
Coats Two coats are recommended for superior coverage.
Brush A nylon/polyester brush is recommended for this project.
Roller / Pad Use 3/8" to 3/4" nap synthetic roller cover.-Use a synthetic pad.
Airless Spray Recommend pressure 2000 to 2500 psi, using .015" to .021" tip orifice..
HVLP Reduce up to one pint with water per gallon. Accuspray 24K
Conventional Spray Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" to .0045" with matching cap.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 8/26/2010 - Please contact us at 800.452.2315 for additional information or questions