Horizon Pro Satin/Eggshell
Product Data Sheet
| | | |
| Description | AN INTERIOR PIGMENTED COPOLYMER LATEX EMULSION PAINT,LOW ODOR & SOLVENT FREE |
34224 White Base
34225 Midtone Base
34404 Deeptone Base
34405 Neutral Base | This product manufactured to meet all requirements of LEED-NC credit EQ4.2 low emitting materials - paints & coatings |
|
| Basic Use | Horizon Pro Interior Satin is a zero VOC commercial finish for interior walls that is easy to apply and dries quickly. It is value engineered for the commercial market, leaves you with a stain resistant finish and can be used without typical complaints in occupied areas because of very low odor during application making it perfect for high useage areas.
300 gallon minimum manufactured quantity. |
| Colors | tintable white to dark tone colors |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 0.00 | Volume Solids ±2% | 36.50 | Odor | Not offensive |
| VOC lbs/G | 0.00 | Weight Solids ±2% | 51.00 | Thinning | None recommended |
| |
| MPI # | | Theor. Spread Rate | 370.0 | Weight | 11.00 |
| Gloss 60° | 8-10 | Wet Film Thickness | 3.85 mils | Viscosity | 96 - 100 Krebs Units |
| Sheen 85° | 20-30 | Dry Film Thickness | 1.5 mils | Resistance | Good |
| |
| Tinting Type | universal, 0 VOC | Toxic Properties | Non-toxic as dry film | Cleanup | warm soapy water |
| Local Harvest | 30-40% | Light Reflectance | white 90%, less on colors | Packaging | ones & fives |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 30 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | 2 hours | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
All surfaces must be clean, dry and clear of dust or other particulates
Application
Manufactured as a top coat finish to go over properly prepared (primed or previously painted & clean) surfaces as a one or two coat process.
| |
| |
| Brush | No thinning recommended. Use a nylon/polyester brush is recommended. |
| Roller / Pad | No thinning is recommended. Use 3/8" to 3/4" nap synthetic roller cover.-No thinning is recommended. Use a synthetic pad. |
| Airless Spray | No thinning is recommended. Recommend pressure 2000 to 2500 psi, using .015" to .021" tip orifice. |
| HVLP | Reduce up to one pint with water per gallon. Accuspray 24K. |
| Conventional Spray | Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" to .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 10/27/2011 - Please contact us at 800.452.2315 for additional information or questions
