Tuff Deck

Product Data Sheet
DescriptionAN INTERIOR / EXTERIOR PIGMENTED 100% ACRYLIC COATING
527501x White Base
527502x Midtone Base
527503x Deeptone Base
527504x Neutral Base
This product is manufactured to meet all requirements of LEED-NC credit EQ4.2 low emitting materials - paint & coatings
Basic UseA pigmented, opaque, 100% acrylic coating. As a floor finish, where a water reducible system is desired. A 100% acrylic latex finish for use on exterior and interior concrete floors, asphalt and interior wood floors. NOTE: Not to be used on surfaces where vehicles are parked.
Colors
tintable white to black
Properties
VOC gr/L98.00Volume Solids ±2%33.00Odormild ammonia
VOC lbs/G0.82Weight Solids ±2%49.00Thinningnone recommended
 
MPI #60Theor. Spread Rate353.0Weight10.80
Gloss 60°10-15Wet Film Thickness5 milsViscosity87 - 93 Krebs Units
Sheen 85°10-15Dry Film Thickness1.5 milsResistanceexcellent
 
Tinting TypeuniversalToxic PropertiesNon-toxic as dry filmCleanuphot soapy water
Local Harvest25-28%Light Reflectancewhite 90%, less on tintsPackagingsingle & five gallons
 
 
 
 
 
 
 
Dry Times
At 77 degrees Farenheit and 50% Relative Humidity.
Dry To Touch1 hourDry To SandN/ATack Free1 hour
Dry To Recoat24 hoursDry To Topcoat24 hoursDry To HardN/A
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. remove loose paint and patch holes or cracks. Prime bare surfaces, dull or prome glossy surfaces, and then scuff sand using 80 to 100 grit sandpaper on a hand sander. Remove all sanding dust.
MasonryRemove all loose dirt, dust or other foreign material prior to application of Tuff Deck. Concrete surfaces must be thoroughly cured and acid etched.
WoodRemove all loose dirt, dust, or other foreign material prior to application of Tuff Deck
Application
BrushA nylon/polyester brush is recommended..
Roller / PadUse 1/4" to 3/4" nap synthetic roller cover.-
Airless SprayUse equipment capable of constant 2000 psi, using a .015" to .021" tip size.
Conventional SprayUse a DeVilbiss JEA 510, 704 air cap, FX tip or equibalent. Fluid pressure 20 psi; air pressure 40 - 50 psi
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 6/15/2011 - Please contact us at 800.452.2315 for additional information or questions