Horizon Exterior Satin
Product Data Sheet
Properties
|
|
|
|
|
|
| VOC gr/L |
96.00 |
Volume Solids ±2% |
34.00 |
Odor |
slight ammonia |
| VOC lbs/G |
0.80 |
Weight Solids ±2% |
48.00 |
Thinning |
none recommended |
| |
| MPI # |
|
Spread Rate |
364.0 |
Weight |
10.60 |
| Gloss 60° |
9-12 |
Wet Film Thickness |
4 mils |
Viscosity |
90 - 95 Krebs Units |
| Sheen 85° |
|
Dry Film Thickness |
1.5 mils |
Resistance |
very good |
| |
| Tinting Type |
universal |
Toxic Properties |
Non-toxic as dry film |
Cleanup |
hot soapy water |
| Local Harvest |
|
Light Reflectance |
white 90%, less on tints |
Packaging |
single & five gallons |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Dry Times
At 77º Fahrenheit and 50% Relative Humidity:
|
|
|
|
|
|
| Dry To Touch |
1½ hours |
Dry To Sand |
|
Tack Free |
|
| Dry To Recoat |
3 hours |
Dry To Topcoat |
|
Dry To Hard |
|
Prep & Prime
|
|
| Concrete Block |
Should be filled wtih 501901x Sprayable Block Filler prior to painting for optimum moisture resistance. |
| Masonry |
Prime with 501801x Surfbond II or 501501x Horizon Exterior Latex Primer. Should be well cured and thoroughly clean before painting. |
| Metal |
Performs quite satisfactorily on properly primed ferrous metal and clean galvanized metal, such as gutters and down spouts. |
|
|
| Wood |
New wood should be primed with Rodda 501501x Horizon Exterior Latex Primer prior to finish coat. Surfaces to be repainted should be thoroughly clean prior to painting. |
|
|
Application
Do not apply to surfaces below 50° Fahrenheit. Avoid application to surfaces exposed and heated from direct sunlight.
|
|
|
|
| Brush |
A nylon/polyester brush is recommended for this project. |
| Roller / Pad |
Use 3/8" to 3/4" nap synthetic roller cover.-Use a synthetic pad. |
| Airless Spray |
Recommend pressure 2000 to 2500 psi, using .015" to .021" tip orifice. |
| HVLP |
Reduce up to one pint with water per gallon. Accuspray 24K. |
| Conventional Spray |
Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" to .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/10/2009 - Please contact us at 800.452.2315 for additional information or questions
