Bookmark and Share

Acrylic Latex Zone Marking Paint

Product Data Sheet
Description AN EXTERIOR PIGMENTED ACRYLIC WATERBORNE FLAT TRAFFIC LINE MARKING PAINT
517101x White
517188x Yellow
Lead & Chromate free
Basic Use A solid covering, "lead and chromate free" latex traffic line paint. A durable indicator in marking streets, parking lots, or game courts. Developed for use over emulsified coal tar type compounds (sealers) where solvent type traffic paints may cause the surface to crack, bleed, and lift, such as tennis courts, playgrounds, and parking lots. Also ideal for regular application over cement and other concrete surfaces.
Properties
VOC gr/L 98.00 Volume Solids ±2% 33.00 Odor slight ammonia
VOC lbs/G 0.82 Weight Solids ±2% 49.00 Thinning not normally necessary
 
MPI # Spread Rate 353.0 Weight 10.80
Gloss 60° 0-10 Wet Film Thickness 5 mils Viscosity 88 - 92 Krebs Units
Sheen 85° Dry Film Thickness 1.5 mils Resistance abrasion very good
 
Tinting Type universal Toxic Properties Cleanup warm soapy water, ASAP
Local Harvest Light Reflectance Packaging single & five gallons
 
 
 
 
 
 
 
Dry Times
At 77º Fahrenheit and 50% Relative Humidity. No traffic pickup after 1 to 2 hours. Allow overnight dry before parking on.
Dry To Touch 30 - 45 minutes Dry To Sand Tack Free
Dry To Recoat Dry To Topcoat Dry To Hard
Prep & Prime
Asphalt New asphalt surface and sealers vary widely on length of cure time required due to type and weather. Insufficient cure may result in bleed, crack and/or lift when painted. Two weeks cure time is usually adequate.
Application
Do not apply on wet surfaces. Do not apply when temperature is below 50ºFahrenheit (air and surface) or when relative humidity exceeds 85%. Cool damp weather or exceeding the recommended wet film thickness will prolong dry time.
Coats Additional spread rates: 815 lineal feet of standard 4" stripe per gallon at 1.5 mils DFT; 1085 lineal feet of 3" stripe per gallon; 650 lineal feet of 5" stripe per gallon; 540 lineal feet of 6" stripe per gallon (allowing for 20% loss in spraying)
Brush Use a good quality natural bristle brush
Roller / Pad Use 3/8" to 1/2" nap synthetic roller cover.-Use a top quality synthetic pad.
Airless Spray Use suitable line striping equipment
Conventional Spray Use suitable line striping equipment
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/10/2009 - Please contact us at 800.452.2315 for additional information or questions