Horizon Exterior Flat
Product Data Sheet
Properties
|
|
|
|
|
|
| VOC gr/L |
93.00 |
Volume Solids ±2% |
37.00 |
Odor |
mild ammonia |
| VOC lbs/G |
0.78 |
Weight Solids ±2% |
53.00 |
Thinning |
none Recommended |
| |
| MPI # |
|
Spread Rate |
396.0 |
Weight |
11.20 |
| Gloss 60° |
|
Wet Film Thickness |
4 mils |
Viscosity |
97 - 107 Krebs Units |
| Sheen 85° |
|
Dry Film Thickness |
1.5 mils |
Resistance |
very good |
| |
| Tinting Type |
universal |
Toxic Properties |
Non-toxic as dry film |
Cleanup |
hot soapy water |
| Local Harvest |
|
Light Reflectance |
white 90%, less on tints |
Packaging |
single & five gallons |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Dry Times
At 77º Fahrenheit and 50% Relative Humidity:
|
|
|
|
|
|
| Dry To Touch |
1 hour |
Dry To Sand |
|
Tack Free |
|
| Dry To Recoat |
3 hours |
Dry To Topcoat |
|
Dry To Hard |
|
Prep & Prime
|
|
| Concrete Block |
Fill wtih 501901x Sprayable Block Filler. |
| Masonry |
Should be clean and free from dirt, oil, grease and efflorescence and other foreign matter. |
| Metal |
Not designed for metal, but performs quite satisfactorily on properly primed ferrous metal and clean galvanized metal, such as gutters and down spouts. |
|
|
| Wood |
New Wood: Should be primed with 501501x Horizon Exterior Primer prior to application. |
|
|
Application
Do not apply to surfaces below Fahrenheit. Avoid application to surfaces exposed and heated by direct sunlight.
|
|
|
|
| Brush |
A nylon/polyester brush is recommended for this product. |
| Roller / Pad |
Use 3/8" to 1" nap synthetic roller cover.-Use a synthetic pad. |
| Airless Spray |
Recommend pressure 2000 to 2500 psi, using .015 to 0.21 tip orifice. |
| HVLP |
Reduce up to one pint with water per gallon. Accuspray 24K |
| Conventional Spray |
Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" to .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/10/2009 - Please contact us at 800.452.2315 for additional information or questions
