Vapor Block
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 99.00 | Volume Solids ±2% | 30.00 | Odor | slight ammonia |
| VOC lbs/G | 0.83 | Weight Solids ±2% | 46.00 | Thinning | none recommended |
| |
| MPI # | | Theor. Spread Rate | 331.0 | Weight | 10.80 |
| Gloss 60° | 0-5 | Wet Film Thickness | 5 mils | Viscosity | 79 - 82 Krebs Units |
| Sheen 85° | 0-5 | Dry Film Thickness | 1.5 mils | Resistance | very good |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dry film | Cleanup | hot soapy water |
| Local Harvest | 49% | Light Reflectance | white 80%, less on tints | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 3 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | 30 minutes | Dry To Topcoat | 4 hours | Dry To Hard | |
Prep & Prime
| |
| |
| |
| |
| Wallboard | Interior wallboard surfaces should be thoroughly cured and cleaned of all dust, etc. before painting. |
| |
| |
Application
1 coat @ 320 sq ft/gal = 0.68 perm 1 coat @ 210 sq ft/gal = 0.50 perm 1 coat @ 160 sq ft/gal = 0.42 perm
2 coats @ 640 sq ft/gal = 0.55 perm 2 coats @ 425 sq ft/gal = 0.50 perm 2 coats @ 320 sq ft/gal = 0.30 perm
| |
| |
| Brush | Use a top quality nylon/polyester brush |
| Roller / Pad | Use a top quality synthetic roller cover |
| Airless Spray | Equipment capable of maintaining constant 1800 psi at the tip. Use a .013" to .019" tip orifice |
| |
| Conventional Spray | DeVilbiss JGA Gun or equivalent. Fluid pressure 25 - 30 psi; atomizing pressure 40 - 50 psi |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 8/19/2011 - Please contact us at 800.452.2315 for additional information or questions
