Bookmark and Share

Flat Dryfall - Flat

Product Data Sheet
Description AN INTERIOR PIGMENTED 100% ACRYLIC FLAT LATEX
5339385
Basic Use An interior flat white paint for fast finishing of ceilings by airless spray. Designed so that under normal conditions of application the overspray falls to the floor as dry dust which may be swept up without damaging the surface (surface must be dry). This enables the painting of ceiling beams, girders, trusses, corregated metal, acoustic ceiling tiles, concrete, wood, etc. without the costly operation of covering. Water, nicotene, and other stains must be treated prior to coating.
Colors
White and Off-White colors only
Properties
VOC gr/L 73.00 Volume Solids ±2% 42.00 Odor Ammonia odor
VOC lbs/G 0.61 Weight Solids ±2% 64.00 Thinning do not thin
 
MPI # Spread Rate 0.0 Weight 13.30
Gloss 60° 2.5 Wet Film Thickness Viscosity 88 - 95 Kreb Units
Sheen 85° Dry Film Thickness 1.5 - 2.0 mils Resistance
 
Tinting Type universal Toxic Properties Non-toxic as dry film Cleanup warm soapy water
Local Harvest Light Reflectance white 90%, less on tints Packaging five gallons
 
 
 
 
 
 
 
Dry Times
@ 77 degrees Fahrenheit and 50% relative humidity
Dry To Touch 15 Minutes Dry To Sand Tack Free
Dry To Recoat 4 Hours Dry To Topcoat Dry To Hard
Prep & Prime
All surfaces must be clean and free of moisture. Water, nicotene, and other stains must be treated prior to application.
Masonry Masonry must be thoroughly cured (28 days), with all traces of efflorescence removed prior to painting. Increased efflorescence resistance can be achieved by first primimg with 501601x Rodda First Coat Primer
Metal Self Priming, surfaces must be clean and dry.
Wallboard Self Priming
Wood If Tannin bleading is a concern prime with Rodda 501601x First Coat Primer
Application
Thinning will effect dryfall times and lengths
Coats One coat at 1.5 - 2.0 dry mils
Airless Spray Recommended pressure: 1800 - 2200 psi using a .018" - .021" tip
HVLP Reduce with up to 1 pint per gallon of clean tap water. Accuspray 24k
Conventional Spray Reduce with up to 1 pint per gallon of clean tap water. Recomended air pressure: 40 - 60 psi; fluid pressure 20 psi; tip size: .0042" - .0045" with matching cap
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/1/2009 - Please contact us at 800.452.2315 for additional information or questions