Allwall Master Painter Eggshell
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 49.00 | Volume Solids ±2% | 37.00 | Odor | Mild odor of ammonia. |
| VOC lbs/G | 0.41 | Weight Solids ±2% | 54.00 | Thinning | Do Not Thin. |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 11.36 |
| Gloss 60° | | Wet Film Thickness | | Viscosity | 98 to 105 Krebs Units. |
| Sheen 85° | | Dry Film Thickness | | Resistance | Good. |
| |
| Tinting Type | | Toxic Properties | None as a dry film. | Cleanup | Use warm soapy water for most |
| Local Harvest | | Light Reflectance | 86% on white. | Packaging | As requested |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
| | | | | |
| Dry To Touch | 30 minutes. | Dry To Sand | | Tack Free | |
| Dry To Recoat | 2 hours. | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
All surfaces to be painted must be clean and dry. Remove all traces of peeling and flaking paint by whatever means necessary on repainting jobs.
| |
| Concrete Block | Prime with 505901x Sprayable Smooth Block Filler. |
| Masonry | NEW MASONRY: Prime with First Coat 501601x or Multiprime 505901x. NEW CONCRETE: Prime with First Coat 501601x or Multiprime 505901x. |
| Metal | GALVANIZED: Clean thoroughly. Prime with 709700xx Vinyl Wash Primer. ALUMINUM: Hand clean areas that exhibit white corrosion. NEW ALUMINUM: Surfaces should be properly treated. FERROUS METAL: Prime with Barrier III High Solids Metal Primer 7082xxx or All Purpose Rust Inhibitve Primer 708195x or Metal Master DTM Primer. |
| Wallboard | Prime with 507801x Scotseal. |
| Wood | NEW INTERIOR: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater. |
| |
Application
| |
| |
| Brush | No thinning is recommended. A Nylon/polyester brush is recommended for this product. |
| Roller / Pad | No thinning is recommended. Use a 3/8" to 3/4" nap synthetic roller cover.-No thinning is recommended. Use a synthetic pad. |
| Airless Spray | No thinning is recommended. Recommended pressure washing 2000 to 2500 psi using a .015" to .021" tip orifice. Recommend Backrolling to achieve proper touch up |
| HVLP | Reduce up to one pint with water per gallon. Accuspray 24K. |
| Conventional Spray | Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" - .0045: matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 3/25/2009 - Please contact us at 800.452.2315 for additional information or questions
