Bookmark and Share

Allwall Lasyn Eggshell

Product Data Sheet
Description A vinyl acrylic wall paint.
533898x White Base
Basic Use A premium finish, vinyl acrylic formulated primarily to protect and beautify interior surfaces. Excellent for masonry (concrete, cement block, cinder block), wallboard, stone, brick, and wood. May also be used on properly primed steel.
Properties
VOC gr/L 116.00 Volume Solids ±2% 32.00 Odor Mild latex paint odor.
VOC lbs/G 0.97 Weight Solids ±2% 49.00 Thinning None recommended.
 
MPI # Spread Rate 0.0 Weight 11.10
Gloss 60° Wet Film Thickness Viscosity 96 to 102 Krebs Units.
Sheen 85° Dry Film Thickness 1.5 to 2 mils Resistance Very good
 
Tinting Type Toxic Properties Non-toxic as a dried film. Cleanup Use hot soapy water for most e
Local Harvest Light Reflectance 90% on white, lower on colors. Packaging Stocked in quart, single, and
 
 
 
 
 
 
 
Dry Times
77 degrees F. and 50% relative humidity.
Dry To Touch 1/2 hour. Dry To Sand Tack Free
Dry To Recoat 2 hours. Dry To Topcoat Dry To Hard
Prep & Prime
Concrete Block Fill with 501901x Sprayable Smooth Block Filler.
Masonry Prime with 505901x Multi Prime or 501601x First Coat Primer.
Metal GALVANIZED: Clean thoroughly, no primer necessary. ALUMINUM: Hand clean areas that exhibit white corrosion. NEW ALUMINUM: Surfaces must be properly treated. FERROUS METAL: Prime with 7082xxx Barrier III High Solids Metal Primer or 708195x All Purpose Rust Inhibitive Primer.
Wallboard Self priming or use 507801x Scotseal, or 507701x Roseal.
Wood New Interior: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater.
Application
Brush A nylon/polyester brush is recommended for this product.
Roller / Pad Use a 3/8" to 3/4" nap synthetic roller cover.-Use a synthetic pad.
Airless Spray Recommended pressure 2000 to 2500 psi using .015" to .021" tip orifice.
HVLP Reduce up to one pint with water per gallon. Accuspray 24K.
Conventional Spray Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" - .0045: matching cap.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 3/25/2009 - Please contact us at 800.452.2315 for additional information or questions