Allwall Lasyn SemiGloss
Product Data Sheet
Properties
|
|
|
|
|
|
| VOC gr/L |
149.00 |
Volume Solids ±2% |
36.00 |
Odor |
Mild latex paint odor |
| VOC lbs/G |
1.24 |
Weight Solids ±2% |
51.00 |
Thinning |
None recommended. If necessary |
| |
| MPI # |
|
Spread Rate |
0.0 |
Weight |
10.90 |
| Gloss 60° |
10-15 |
Wet Film Thickness |
|
Viscosity |
94 to 98 Krebs Units. |
| Sheen 85° |
|
Dry Film Thickness |
1.5 - 2.0 dry mils |
Resistance |
Good. |
| |
| Tinting Type |
|
Toxic Properties |
None as a dry film. |
Cleanup |
Use hot soapy water for most e |
| Local Harvest |
|
Light Reflectance |
90% on white, lower on colors. |
Packaging |
Stocked in single and five gal |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Dry Times
|
|
|
|
|
|
| Dry To Touch |
1/2 hour. |
Dry To Sand |
|
Tack Free |
|
| Dry To Recoat |
2 hours. |
Dry To Topcoat |
|
Dry To Hard |
|
Prep & Prime
|
|
| Concrete Block |
Fill with 501901x Scotseal Smooth Block Filler. |
| Masonry |
Prime with 505901x Multi Prime or 501601x First Coat Primer. |
| Metal |
GALVANIZED: Clean thoroughly. No primer necessary. ALUMINUM: Hand clean areas that exhibit white corrosion. NEW ALUMINUM: Surfaces must be properly treated. FERROUS METAL: Prime with 7082xxx Barrier III Solids Metal Primer or 708195x All Purpose Rust Inhibitive Primer. |
| Wallboard |
Prime with 507801x Scotseal. |
| Wood |
New Interior: Prime with 502001x Unique II 100% Acrylic Enamel Undercoater. |
|
|
Application
|
|
|
|
| Brush |
A nylon/polyester brush is recommended for this product. |
| Roller / Pad |
Use a 1/4" to 1/2" nap synthetic roller cover.-Use a synthetic pad. |
| Airless Spray |
Recommended pressure 2000 to 2500 psi using .015" to .021" tip orifice. |
| HVLP |
Reduce up to one pint with water per gallon. Accuspray 24K. |
| Conventional Spray |
Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size .0042" - .0045: matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 3/25/2009 - Please contact us at 800.452.2315 for additional information or questions
