Bookmark and Share

Exterior High Build Latex

Product Data Sheet
Description A waterborne, high solids emulsion-type coating for new or previously painted exterior masonry, block, and concrete surfaces.
Basic Use Exterior applications. Primary uses are on substrates such as concrete surfaces not prone to dynamic cracking. High solids content improves filling, uniformity, and film build over concrete block surfaces. Approved for MPI #40
Properties
VOC gr/L 68.50 Volume Solids ±2% 50.50 Odor mild dominant of ammonia
VOC lbs/G 0.57 Weight Solids ±2% 57.50 Thinning thinning not necessary
 
MPI # 40 Spread Rate 0.0 Weight 9.80
Gloss 60° 2.5-10 degrees Wet Film Thickness Viscosity 90-110 Krebs Units
Sheen 85° Dry Film Thickness Resistance
 
Tinting Type Toxic Properties None as dried film Cleanup hot soapy water
Local Harvest Light Reflectance Packaging ones & five gallons
 
 
 
 
 
 
 
Dry Times
Dry To Touch 1 hour Dry To Sand Tack Free
Dry To Recoat 2-4 hours. Dry To Topcoat Dry To Hard
Prep & Prime
Concrete Block Must be thoroughly cured and cleaned prior to coating. Use caution to avoid application to surfaces at less than 50 degrees Fahrenheit.
Application
Brush Use top quality natural or nylon/polyester bristle brush.
Roller / Pad Use a top quality synthetic roller cover.
Airless Spray Use equipment capable of constant 1850 psi at tip. Use 0.15" to 0.21" tip orifice.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/17/2009 - Please contact us at 800.452.2315 for additional information or questions