Bookmark and Share

Ext. Solvent Based Solid Hide Stain

Product Data Sheet
Description An alkyd oil based stain; richly pigmented with high quality pigments to provide good hiding power, similar to that of paint, but allowing the natural texture of the wood to remain visible while leaving a durable film to preserve and protect the wood.
Basic Use Designed for use on all new or previously painted siding, sidewall shakes or fences. (NOTE: not recommended on decks- use only semi-transparent. Approved by the Master Painter Institute under category #14.
Properties
VOC gr/L 357.00 Volume Solids ±2% 54.00 Odor Mild solvent odor.
VOC lbs/G 2.98 Weight Solids ±2% 73.50 Thinning Do not thin.
 
MPI # 14 Spread Rate 0.0 Weight 11.40
Gloss 60° 2-10 degrees Wet Film Thickness Viscosity 60-80 Krebs Units at 77 degree
Sheen 85° Dry Film Thickness Resistance
 
Tinting Type Toxic Properties None as dried film. Cleanup Use 799250x Mineral Thinner.
Local Harvest Light Reflectance Packaging
 
 
 
 
 
 
 
Dry Times
Dry To Touch 3 to 4 hours. Dry To Sand Tack Free
Dry To Recoat 16 to 24 hours. Dry To Topcoat Dry To Hard
Prep & Prime
Wood No special surface preparation required on new wood. All surfaces to be coated must be clean and dry. Not recommended on brushed, burnished, or abraded plywood.
Application
Brush A natural bristle brush or good quality nylon/polyester is recommended.
Roller / Pad Using 1/2" to 3/4" lambswool or polyester cover will give best results.-Use a synthetic pad.
Airless Spray Use equipment capable of maintaining constant 900 psi at the tip, .016" to .025" tip orifice. Follow with backroll/backbrush application.
Conventional Spray Use double regulated pressure pot equiped with an air agitator. Use DeVilbiss JGA510 with FF tip and 704 air cap. Follow with backroll/backbrush application.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/17/2009 - Please contact us at 800.452.2315 for additional information or questions