Bookmark and Share

Diamathane Enamel Low Sheen-Neutral

Product Data Sheet
Description A Polyurethane Modified Alkyd Finish.
33308
Basic Use Tough, durable finish for interior and exterior surfaces, equipment, implements, tools, etc.
Properties
VOC gr/L 374.50 Volume Solids ±2% 55.00 Odor Dominant odor of paint thinner
VOC lbs/G 3.13 Weight Solids ±2% 70.50 Thinning Do not thin.
 
MPI # Spread Rate 0.0 Weight 10.75
Gloss 60° 35-45 degrees. Wet Film Thickness Viscosity 65-75 Krebs Units at 77 degree
Sheen 85° Dry Film Thickness Resistance
 
Tinting Type Toxic Properties None as dried film. Cleanup Use 799250x Mineral Thinner.
Local Harvest Light Reflectance Packaging
 
 
 
 
 
 
 
Dry Times
Dry To Touch 4 hours. Dry To Sand Tack Free
Dry To Recoat 24 hours. Dry To Topcoat Dry To Hard
Prep & Prime
Metal Galvanize: Clean thoroughly. Prime with No. 4079 Galva Cling.

Aluminum: Hand clean areas that exhibit white corrosion.

Ferrous: Prime with 7082xxx Barrier III High Solids Metal Primer or 708195x All Purpose Rust Inhibitive Primer.

This product can be made into DTM with incorporation of anti-rust materials on special request.
Application
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/17/2009 - Please contact us at 800.452.2315 for additional information or questions