Concrete Sealer / Stain
Product Data Sheet
| | | |
| Description | A TONED SEMI OPAQUE MMA-EA COPOLYMER RESIN STAIN & SEALER FOR CONCRETE |
733265x WA State Gray
733324x Mt St Helens Gray
734140x Mt Baker Gray
734170x Cascade Green | This product has been approved by the Washington State Department of Transportation for use on DOT projects. |
|
| Basic Use | Rodda Concrete Sealer is formulated to give a natural finish to concrete. Concrete Sealer Stain will protect concrete, concrete blocks, and aggregate against spalling, cracking, efflorescence and other typres of damage caused by water entering the masonry. This product is a fast drying, low luster finish that provides excellent durability and surface color consistency. |
| Colors | Washington State Gray, Mt St Helens Gray, Mt Baker Gray, Cascade Green |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 639.00 | Volume Solids ±2% | 26.00 | Odor | Aliphatic/Aromatic Hydrocarbon |
| VOC lbs/G | 5.33 | Weight Solids ±2% | 44.50 | Thinning | not recommended |
| |
| MPI # | | Theor. Spread Rate | 125.0 | Weight | 9.65 |
| Gloss 60° | 0-4 | Wet Film Thickness | | Viscosity | 55-60 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 2.25 | Resistance | |
| |
| Tinting Type | | Toxic Properties | | Cleanup | xylol |
| Local Harvest | | Light Reflectance | | Packaging | 5 gallons |
| |
| | Pigment Solids | Inerts | Flash Point | 23F (TCC) |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
| | | | | |
| Dry To Touch | 30 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
The surface to be coated must be clean, dry, and free of dust, dirt, efflorescence, scale, from released agents, or grease. Surface must be acid etched or a light sweep blast prior to application.
Application
Concrete must be allowed to age for 28 days before application of this product. Do not paint during extremely cold, frosty or damp weather. Product ust be applied to a clean dry surface, free of moisture. If rainfall or other moisture is encountered, the concrete must be allowed to dry until there is none left visible. Application temperature range is 35 (and rising) to 90 degrees (F). Best applied with an airless or conventional spray system.
| |
| |
| |
| |
| Airless Spray | best application - application spread rate 75-150 square feet at 2.0-2.5 dry film thickness, depending on substrate texture and absorbtion |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 1/21/2011 - Please contact us at 800.452.2315 for additional information or questions
