Latex Dryfall Semi-Gloss
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 163.00 | Volume Solids ±2% | 30.70 | Odor | Mild ammonia odor during appli |
| VOC lbs/G | 1.36 | Weight Solids ±2% | 44.40 | Thinning | None recommended. If necessary |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 10.24 |
| Gloss 60° | 20-30 | Wet Film Thickness | | Viscosity | 80 - 90 Krebs Units. |
| Sheen 85° | | Dry Film Thickness | 1.5 mils | Resistance | Good. |
| |
| Tinting Type | | Toxic Properties | Non-toxic as a dry film. | Cleanup | Use warm soapy water for most |
| Local Harvest | | Light Reflectance | 84% | Packaging | Stocked in single and five gal |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77º Fahrenheit and 50% Relative Humidity:
| | | | | |
| Dry To Touch | 1/2 hour. | Dry To Sand | | Tack Free | |
| Dry To Recoat | 2 hours. | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
| |
| Concrete Block | May be applied directly. |
| Masonry | Should be clean and free of dirt, oil, grease and efflorescence and other foreign matter. |
| Metal | Galvanized: May be applied directly.
New Galvanized: Surfaces must be properly cleaned.
Ferrous Metal: May be applied directly.
Coated Metal: Clean thoroughly. |
| |
| Wood | New Interior: Prime with No. 501601x First Coat Primer to prevent Tannin Bleed. |
| |
Application
| |
| |
| Brush | No thinning recommended. A nylon/polyester brush is recommended. |
| Roller / Pad | No thinning is recommended. Use a 3/8" to 3/4" nap synthetic roller cover. No thinning is recommended. Use a synthetic pad. |
| Airless Spray | No thinning is recommended. Recommended pressure is 2000 psi to 2500 psi using a .015" to .021" tip orifice. |
| HVLP | Reduce up to one pint per gallon. Accuspray 24K. |
| Conventional Spray | Reduce up to 1 pint per gallon with water. Recommended air pressure 40 - 60 psi; fluid pressure 20 psi; tip size .0042" - .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/17/2009 - Please contact us at 800.452.2315 for additional information or questions
