Vapor Shield
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 115.00 | Volume Solids ±2% | 21.00 | Odor | Not offensive |
| VOC lbs/G | 0.96 | Weight Solids ±2% | 34.00 | Thinning | None recommended |
| |
| MPI # | | Theor. Spread Rate | 220.0 | Weight | 10.00 |
| Gloss 60° | 0-5 | Wet Film Thickness | 6 mils | Viscosity | 88 - 92 Krebs Units |
| Sheen 85° | 0-5 | Dry Film Thickness | 1.5 mils | Resistance | good |
| |
| Tinting Type | universal | Toxic Properties | Non-toxic as dry film | Cleanup | warm soapy water |
| Local Harvest | 61% | Light Reflectance | white 84% | Packaging | single & five gallons |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity:
| | | | | |
| Dry To Touch | 1/2 hour | Dry To Sand | N/A | Tack Free | 1/2 hour |
| Dry To Recoat | 1/2 hours | Dry To Topcoat | 4 hours | Dry To Hard | N/A |
Prep & Prime
| |
| |
| |
| |
| Wallboard | Interior wallboard surfaces should be thoroughly cured and cleaned of all dust, etc. before painting. |
| |
| |
Application
1 coat @ 212 sq ft/gal = 1.25 dry mils (0.75 perm)
1 coat @ 160 sq ft/gal = 1.70 dry mils (0.65 perm)
1 coat @ 105 sq ft/gal = 2.50 dry mils (0.60 perm)
Do not apply when air or surface temperatures are expcted to drop below 50 degrees or rise above 95 degrees F. during application and drying.
| |
| |
| Brush | No thinning recommended. Use a nylon/polyester brush is recommended. |
| Roller / Pad | No thinning is recommended. Use a 3/8" to 3/4" nap synthetic roller cover.-No thinning is recommended. Use a synthetic pad. |
| Airless Spray | No thinning is recommended. Recommended using 1800 psi to 2500 psi using a .013" to .019" tip orifice. |
| HVLP | Reduce up to one pint per gallon. Accuspray 24K. |
| Conventional Spray | Reduce up to 1 pint per gallon with water. Recommended air pressure 40 - 60 psi; fluid pressure 20 psi; tip size .0042" - .0045" with matching cap. |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 11/11/2011 - Please contact us at 800.452.2315 for additional information or questions
