Rodda Paint on Facebook!E-News sign-up

Ezee Wall Prep

Product Data Sheet
DescriptionAN INTERIOR PIGMENTED VINYL ACRYLIC HEAVY BODIED LATEX SPECIALTY PRIMER
532516x Ezee Wall Prep
Basic UseA heavy-bodied Thixotropic latex flat for high production airless spraying of interior wall surfaces. High build features permit application of up to 6 - 10 dry mils without running or sagging incorporating the advantages of a multi-coat into a single application. To be used as a wallboard and smooth wall preparation to hide minor defects and even the surface prior to top coating, to assure a smooth finish suitable for a Level 5 finish, NWWCB 304 April 05.
Properties
VOC gr/L74.00Volume Solids ±2%38.00Odormild of ammonia
VOC lbs/G0.62Weight Solids ±2%58.00Thinningnone recommended
 
MPI #Theor. Spread Rate81.0Weight12.30
Gloss 60°Wet Film Thickness20Viscosity105 Krebs Units
Sheen 85°Dry Film Thickness7.5Resistance
 
Tinting TypeUniversalToxic PropertiesNon-toxic as dry filmCleanuphot soapy water
Local HarvestLight Reflectancewhite 90%Packagingfive gallons
 
 
 
 
 
 
 
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity:
Dry To Touch1/2 hour.Dry To SandN/ATack Free1/2 hour
Dry To Recoat2 hours.Dry To Topcoat2 hoursDry To Hard12 hours
Prep & Prime
MasonryN/A
WallboardInterior wallboard surfaces should be thoroughly cured, and cleaned of all dust or contaminants before coating.
WoodNew Interior: Primed with No. 502001x Unique II Acrylic Enamel Undercoater.
Application
CoatsNo thinning is recommended.
Airless SprayRecommend pressure 2000 to 2500 psi, using .017" to .021" tip orifice.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 7/11/2011 - Please contact us at 800.452.2315 for additional information or questions