SSPC Specification Paint N0. 5-Zinc Dust
Product Data Sheet
| | | |
| Description | A quick drying zinc dust, zinc oxide, and phenolic varnish paint for steel or galvanized surfaces. |
| 732299x | |
|
| Basic Use | For use as a primer over pickled or blast cleaned steel in atmosheric exposure. Approved by the Master Painter Institute under category #135. |
| |
| | Components | Two components. |
| | | |
| | Mixing Instructions | Gradually add the pigment portion to the liquid while stirring continuously. |
Properties
| | | | | |
| VOC gr/L | 304.00 | Volume Solids ±2% | 60.50 | Odor | Odor of hydrocarbon solvents. |
| VOC lbs/G | 2.54 | Weight Solids ±2% | 88.50 | Thinning | Thin only if necessary with pa |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 21.50 |
| Gloss 60° | | Wet Film Thickness | | Viscosity | 72-92 krebs units at 77 degree |
| Sheen 85° | | Dry Film Thickness | | Resistance | |
| |
| Tinting Type | | Toxic Properties | Contains zinc | Cleanup | Use 799250x Mineral Thinner. |
| Local Harvest | | Light Reflectance | | Packaging | This paint is supplied in two- |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
| | | | | |
| Dry To Touch | | Dry To Sand | | Tack Free | |
| Dry To Recoat | Less than 24 hours. | Dry To Topcoat | | Dry To Hard | 12 hours |
Prep & Prime
| |
| |
| |
| Metal | All rust scale, loose rust, loose mill scale, and loose or nonadherent paint must be removed. Oil and grease residues must be removed to the fullest extent practical. |
| |
| |
| |
Application
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/9/2009 - Please contact us at 800.452.2315 for additional information or questions
