100% Acrylic Dryfall - Black
Product Data Sheet
| | | |
| Description | AN INTERIOR PIGMENTED 100% ACRYLIC FLAT LATEX PAINT |
| 531697x Black | |
|
| Basic Use | An interior flat black paint for fast refinishing of ceilings or wall areas by airless spray. Designed so that under normal conditions of application, the overspray does not stick but falls to the floor as dry dust which may be swept up without damaging the surface (It is important that the surface by dry). This enables the painting of ceiling beams, girders, trusses, corrugated metal, concrete, wood, etc., without the costly operation of covering. |
| |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 82.00 | Volume Solids ±2% | 37.00 | Odor | mild ammonia odor |
| VOC lbs/G | 0.68 | Weight Solids ±2% | 50.00 | Thinning | do not thin |
| |
| MPI # | | Theor. Spread Rate | 0.0 | Weight | 11.02 |
| Gloss 60° | 0 - 5 | Wet Film Thickness | | Viscosity | 88 - 92 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1.5 to 2mils | Resistance | good |
| |
| Tinting Type | | Toxic Properties | Non-toxic as dry film | Cleanup | warm soapy water |
| Local Harvest | | Light Reflectance | | Packaging | As requested |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
| | | | | |
| Dry To Touch | 10 to 15 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | 8 hours | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
| |
| |
| Masonry | Masonry must be thoroughly cured, with all traces of efflorescence removed prior to painting |
| Metal | All metal should be properly primed prior to painting. |
| Wallboard | Self priming |
| Wood | Must be dry and clean. Self priming |
| |
Application
| |
| |
| Brush | Use a top quality nylon/polyester brush |
| Roller / Pad | Use a top quality synthetic roller cover |
| |
| |
| |
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/1/2009 - Please contact us at 800.452.2315 for additional information or questions
