OSHD Formula 100-82
Product Data Sheet
Properties
| | | | | |
| VOC gr/L | 77.20 | Volume Solids ±2% | 45.08 | Odor | Mild odor of latex paint. |
| VOC lbs/G | 0.64 | Weight Solids ±2% | 60.36 | Thinning | Do not thin |
| |
| MPI # | | Theor. Spread Rate | 360.0 | Weight | 11.60 |
| Gloss 60° | | Wet Film Thickness | 4.4 | Viscosity | 86 to 92 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 2.0 | Resistance | Excellent. |
| |
| Tinting Type | | Toxic Properties | Non Toxic as a dry film. | Cleanup | Use warm soapy water for most |
| Local Harvest | | Light Reflectance | Approximately 28% | Packaging | As requested |
| |
| | | | | |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77 Degrees Fahrenheit & 50% Relative Humidity.
| | | | | |
| Dry To Touch | 15 to 30 minutes. | Dry To Sand | | Tack Free | |
| Dry To Recoat | 2 hours. | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
All surfaces to be painted must be clean and dry. Remove all traces of peeling and flaking paint by whatever means necessary on repainting jobs. OSHD inspector will determine substrate's suitability for painting on state jobs.
| |
| |
| Masonry | New concrete should be allowed 28 days to cure at approximately 70 degrees Fahrenheit. Suspect areas may be tested by ASTM D4263 The Plastic Sheet Method and/or with a pH test.
All Form oils, release agents, grease, oil, dirt, and powdery residues should be removed. Surface cleaning methods which may be used include vacuum cleaning, compressed air blow down, or water cleaning per ASTM D4258. |
| Metal | All metal should be properly primed prior to painting. |
| Wallboard | All surfaces to be coated must be dry and clean. For best results, prime each substrate prior to topcoating. |
| Wood | All surfaces to be coated must be dry and clean. For best results, prime each substrate prior to topcoating. |
| |
Application
The surface should be dry and above 45 degrees Fahrenheit at the time of paint application.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 3/2/2011 - Please contact us at 800.452.2315 for additional information or questions
