Low VOC Shopcoat Metal Primer - Red Oxide
Product Data Sheet
| | | |
| Description | Phenolic Modified Alkyd primer |
| |
|
| Basic Use | A low VOC, high solids material designed for industrial applications. Used for priming all exterior or interior ferrous metal surfaces such as structural steel, undercarriages, bridges, tanks, towers, piping, sash and trim metal doors and frames, ornamental iron, gutters, fire escapes and miscellaneous metal objects. Contains an anti-corrosive pigment, zinc phosphate , which resists formation of rust, thus preserving the metal as well as the integrity of finishing coats. |
| Colors | Red Oxide |
| | | |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 340.00 | Volume Solids ±2% | 59.12 | Odor | Aromatic Solvents |
| VOC lbs/G | 2.84 | Weight Solids ±2% | 77.95 | Thinning | 2-5% W/799272, 799249 |
| |
| MPI # | | Theor. Spread Rate | 475.0 | Weight | 12.89 |
| Gloss 60° | 2.0 | Wet Film Thickness | 3.5 | Viscosity | 90 - 100 KU |
| Sheen 85° | 30 - 40 | Dry Film Thickness | 2.0 | Resistance | |
| |
| Tinting Type | | Toxic Properties | None as a dry film | Cleanup | Use 799260 Synthetic Reducer |
| Local Harvest | 47% | Light Reflectance | | Packaging | Fives, and drums |
| |
| | | | | |
| |
| Hap Content | 1.22 lb/gal, 146.6 g/l | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
77 degree F. and 50% relative humidity). Dry time varies depending on film thickness, temperature, humidity, etc.
| | | | | |
| Dry To Touch | 8 - 10 minutes | Dry To Sand | | Tack Free | |
| Dry To Recoat | 1 hour to 7 days* | Dry To Topcoat | | Dry To Hard | 30 - 60 minutes |
Prep & Prime
Surfaces must be clean, dry, and free of contaminants such as wax, oils, grease, weld splatter, loose mil, scale, rust. As a minimum SSPC-SPC Hand Tool Cleaning or SSPC-SPC3 Machine Tool Cleaning is recommended for interior exposure. Smooth surfaces should be abraded to enhance adhesion. Improved performance can be achieved with and SSPC-SPC6 Commercial Blast. All surfaces prepared for painting should be coated within 8 hours of completion of surface prep.
Application
Designed for spray application. Small surfaces may be brushed or rolled.
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 3/25/2009 - Please contact us at 800.452.2315 for additional information or questions
