TT-P-28G Hi Heat Aluminum
Product Data Sheet
| | | |
| Description | The Paint covered by this specification is intended for use on heated steel surfaces, at temperatures up to 1200° Fahrenheit. Such use may be on super heated steam lines, boiler casings, boiler drums, super heater headers, and similar high temperature application. It is also for painting military equipment such as personnel heaters, rocket launchers and other components, where temperatures preclude the use of conventional paints. Approved by the Master Painter Institute under category #22. |
| 70002Ax | |
|
| Basic Use | |
| Colors | Aluminum Finish |
| | Components | Single Component |
| | | |
| | | |
Properties
| | | | | |
| VOC gr/L | 540.00 | Volume Solids ±2% | 34.00 | Odor | |
| VOC lbs/G | 4.51 | Weight Solids ±2% | 47.00 | Thinning | |
| |
| MPI # | 22 | Theor. Spread Rate | 0.0 | Weight | 8.50 |
| Gloss 60° | | Wet Film Thickness | | Viscosity | 54 - 67 Krebs Units |
| Sheen 85° | | Dry Film Thickness | 1 mil | Resistance | |
| |
| Tinting Type | | Toxic Properties | | Cleanup | Xylene |
| Local Harvest | | Light Reflectance | | Packaging | Gallon and Fives are available |
| |
| | | | Flash Point | 20° Fahrenheit (TCC) |
| |
| | | | | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Dry Times
At 77º Fahrenheit and 50% Relative Humidity: 3 hours
| | | | | |
| Dry To Touch | | Dry To Sand | | Tack Free | |
| Dry To Recoat | | Dry To Topcoat | | Dry To Hard | |
Prep & Prime
Application
Corporate: 6107 N Marine Drive Portland, Oregon 97203 - Rodda Paint Co. - Regional: 3838 4th Avenue South Seattle, Washington 98134
Disclaimer - All technical advice, recommendations and services regarding this product are rendered by the Seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise. Such recommendations, technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 5/18/2011 - Please contact us at 800.452.2315 for additional information or questions
