Last Update: 11/29/11
STEEL SHIELD EPOXY
6785 6771 KIT
Manufacturer: RODDA PAINT COMPANY6123 N MARINE DRIVEPORTLAND, OR 97203
Name of preparer: N/AInformation Phone: (503) 521-4300
Emergency Phone: (800) 424-9300
Hazardous Ingredients / SARA III Information
| Reportable Components | CAS Number | Vapor Pressure
mm Hg @ Temp | Weight
Percent |
| *# XYLENE | 1330-20-7 | 5.1 | 20 C | 10 - 20 |
| OSHA TWA- 100ppm 435mg/m3 |
| NIOSH TWA- 100ppm 435mg/m3 STEL- 150ppm 655mg/m3 |
| ACGIH TWA- 100ppm 434mg/m3 STEL- 150ppm 651mg/m3 |
| | | | |
| + TITANIUM DIOXIDE | 13463-67-7 | | | 10 - 20 |
| PEL (OSHA) : 15 mg/m3, TOTAL DUST, 8 HR TWA |
| TLV (ACGIH): 10 mg/m3, TOTAL DUST, 8 HR TWA |
| | | | |
| AMINE FUNCTIONAL POLYAMIDE EPOXY ADDUCT | 68953-09-3 | | | 0 - 10 |
| NONE ESTABLISHED |
| | | | |
| *# ETHYLENE GLYCOL MONOPROPYL ETHER | 2807-30-9 | 1.3 | 25 C | 0 - 10 |
| | | | |
| BARIUM SULFATE | 7727-43-7 | | | 0 - 10 |
| TLV - 10 mg/cubic meter |
| | | | |
| +*#> ETHYLBENZENE | 100-41-4 | 10 | 20 C | 0 - 10 |
| OSHA TWA- 100ppm 435mg/m3 |
| NIOSH TWA- 100ppm 435mg/m3 STEL- 125ppm 545mg/m3 |
| ACGIH TWA- 100ppm 434mg/m3 STEL- 125ppm 543mg/m3 |
| | | | |
| *# METHYL ISOBUTYL KETONE | 108-10-1 | 16 | 20C | 0 - 10 |
| OSHA TWA- 100ppm 410mg/m3 |
| NIOSH TWA- 50ppm 205mg/m3 STEL- 75ppm 300mg/m3 |
| ACGIH TWA- 50ppm 205mg/m3 STEL- 75ppm 307mg/m3 |
| | | | |
| * n-BUTYL ALCOHOL | 71-36-3 | 4.4 | 68F | 0 - 10 |
| OSHA TWA- 100ppm 300mg/m3 |
| NIOSH Ceiling- 50ppm 150mg/m3 |
| ACGIH Ceiling- 50ppm 152mg/m3 |
| | | | |
| SOLVENT NAPHTHA, LIGHT AROMATIC | 64742-95-6 | | | 0 - 10 |
| TLV: TWA 100; ACGIH 100; FEDERAL PEL 100 |
| | | | |
| * BARIUM COMPOUND | 13701-59-2 | | | 0 - 10 |
| TLV: 0.5mg/m3 |
| | | | |
| * 1,2,4-TRIMETHYLBENZENE | 95-63-6 | | | 0 - 10 |
| TLV: TWA 25; ACGIH 25; FEDERAL PEL 25 |
| | | | |
The above chemical(s) meet the criteria as defined under 29 CFR 1910 for toxic and hazardous substances. * Indicates toxic material(s) subject to the reporting requirements of Section 313 of Title III and of 40 CFR 372. + Indictates material(s) listed as a NTP, IARC, or OSHA carcinogen.>Indicates material(s) listed on California's Proposition 65 known to the state to cause reproductive toxicity or cancer. # Indicates materials listed in Section 112(b) of the Clean Air Act.Physical / Chemical Characteristics
Boiling Range: 240F - 301 F
Vapor Density: N/A
Solubility in Water: N/A
Appearance and Odor: N/A
Coating VOC: 3.87 lb/gl
Material VOC: 3.87 lb/gl
Specific Gravity: 1.36
Evaporation Rate: N/A
Fire and Explosion Hazard Data
Flash Point: 59 F
Method Used: TCC
Flashable limits in air by volumeUpper: 11.2Lower: 1.0
Extinguishing Media: N/ASpecial Firefighting Procedures:N/AUnusual Fire and Explosion Hazards:N/A
Reactivity Data
Stability: N/A
Hazardous Polymerization: N/A
Conditions to Avoid:N/AIncompatibility (Materials to Avoid):N/AHazardous Decomposition or Byproducts:N/A
Health Hazard Data
Inhalation - Health Risks and Symptoms of Exposure:N/ASkin and Eye Contact - Health Risks and Symptoms of Exposure:N/ASkin Absorbtion - Health Risks and Symptoms of Exposure:N/AIngestion - Health Risks and Symptoms of Exposure:N/AHealth Hazards (Acute and Chronic):N/AHealth Hazards of Previous Coatings:N/ACarcinogenicity:NTP Carcinogen:N/AIARC Monographs:YesOSHA Regulated:Yes
N/AMedical Conditions Generally Aggrevated by Exposure:N/AEmergency and First Aid Procedures:N/A
Precautions for Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled:N/AWaste Disposal Method:N/APrecautions to be Taken in Handling and Storing:N/AOther Precautions:N/A
Control Measures
Respiratory Protection:N/AVentilation:N/AProtective Gloves:N/AEye Protection:N/AOther Protective Clothing or Equipment:N/AWork / Hygienic Practices:N/A
Disclaimer
N/A
